Car decals are loved by car owners throughout the country. They are applied by customers to customize the appearance of their car and are sold by custom signage company melbourne. There are various types of decals that are available. If you want to apply car decals onto your vehicle, the following tips will prove useful.
Smart Steps to Apply Car Decals
1. Ascertain the Location for the Decal
The first thing that you need to do when you decide to apply a car decal is determine the perfect location for the decal. You can either get a decal for the exterior, interior, window, or bumper. If it’s for a caravan then you’ll want to buy caravan decals.
2. Clean the Surface
Before you apply a decal onto your car, you first need to clean the surface of the area where you would like to place the decal. Use soap or rub alcohol to clean the area. Make sure to wash it and dry it. If it’s a business car then you’ll want to get permission from your boss. That way you can display signs for businesses all over your car.
3. Peel the Backing Film
Once you have cleaned the surface, you can start peeling the backing film away carefully. Avoid touching the back of the decal as it would leave dirt onto its backside.
3. Position the Decal Precisely
To apply the car decal, you need to position it precisely. Place one side onto your car first and then smooth it out towards the end. This will help ensure that the decal is decently placed.
4. Remove Bubbles and Trim Obstructions
After you have applied the car decal, you must trim obstructions using a razor blade. Be careful when using the razor. As for bubbles, you can remove them by squeezing the air or puncturing them.
Smart Steps to Remove Car Decals
Generally, it is advised to seek a car care professional to remove a car decal. However, if you want to go at it alone, the following steps should be followed.
1. Cleaning
Before you remove the decal, you need to clean it and its surrounding area. Use soapy water and a dry cloth to clean the area.
2. Warm It Up
Next, you need to warm it up. It is crucial that you heat a decal before removing it. You can use a hair dryer to warm it. It will help release the adhesive from the back and make it a lot easier for you to pull it off. If you do not have a hair dryer, you can use a heat gun.
3. Scrape It Off
Once the decal has been heated up, you can easily scrape it off using a plastic card. Make sure that you start the scraping from a good angle. You may also use a razor blade or even your fingertips to do so.
4. Carefully Use Glue Removal Products
Now, you can make use of glue removal products to get rid of any reside that has been left behind.
5. Complete Wash
Finally, all you need to do is give your car a complete wash to remove any remaining dirt.
Once you have gone over this post, you will have no trouble applying and removing car decals or vehicle wraps campbellfield.